RICHMOND, Va.--(BUSINESS WIRE)--Tredegar Corporation (NYSE:TG) today reported third quarter financial results for the period ended September 30, 2020.
Third quarter 2020 net loss from continuing operations was $17.0 million ($0.51 per diluted share) compared to net income from continuing operations of $15.1 million ($0.45 per diluted share) in the third quarter of 2019. Net income from ongoing operations, which excludes special items and discontinued operations, was $13.2 million ($0.39 per diluted share) in the third quarter of 2020 compared with $13.3 million ($0.40 per diluted share) in the third quarter of 2019. A reconciliation of net income (loss) from continuing operations, a financial measure calculated in accordance with U.S. generally accepted accounting principles (“GAAP”), to net income from ongoing operations, a non-GAAP financial measure, for the three and nine months ended September 30, 2020 and 2019, is provided in Note (a) of the Notes to the Financial Tables in this press release.
On August 24, 2020, the Company entered into a definitive agreement to sell its Personal Care Films business ("Personal Care business"), which excludes the packaging film lines and related operations located at the Pottsville, Pennsylvania manufacturing site ("Pottsville Packaging"). The Company completed this divestiture at the end of October and received gross proceeds of $60.5 million. Net cash proceeds from the sale, after future deductions for transaction costs, purchase price adjustments and transition services after September 30, 2020, are estimated at $45 to $50 million. Net cash income tax costs or benefits relating to the transaction are expected to be negligible. All historical results for the Personal Care business have been presented as discontinued operations. The surface protection component of the PE Films segment now includes Pottsville Packaging.
Third Quarter Financial Results Highlights
- Earnings before interest, taxes, depreciation and amortization ("EBITDA") from ongoing operations for Aluminum Extrusions of $16.5 million was $0.1 million higher than the third quarter of 2019
- EBITDA from ongoing operations for PE Films of $6.0 million was $4.2 million lower than the third quarter of 2019
- EBITDA from ongoing operations for Flexible Packaging Films of $9.5 million was $5.2 million higher than the third quarter of 2019
John Steitz, Tredegar’s president and chief executive officer said, “Despite COVID-19-related lower volume, Bonnell Aluminum's EBITDA from ongoing operations during the third quarter was essentially flat with last year. It continues to outperform our expectations. The PE Films segment experienced a decline in profitability during the third quarter versus last year due to previously disclosed customer product transitions in the Surface Protection component that had been delayed. Our Surface Protection team has been making progress in generating sales from new products, applications and customers to help offset the expected future adverse impact of the transitions. Regarding Terphane, our flexible packaging films business, its performance has been a great story since 2017, but especially in 2020 with EBITDA from ongoing operations doubling in 2020 versus 2019."
Mr. Steitz continued, "We had strong cash flow during the third quarter with net cash in excess of debt as of September 30, 2020 of $28.0 million, up from $5.9 million as of June 30, 2020, which excludes the net cash proceeds expected from the sale of the Personal Care business of $45 to $50 million."
On a final note, Mr. Steitz commented, "I'd like to thank again all of our employees for their hard work and dedication during these unprecedented times."
THE IMPACT OF COVID-19
Essential Business and Employee Considerations
The Company’s priorities during the COVID-19 pandemic continue to be to protect the health and safety of employees while keeping its manufacturing sites open due to the essential nature of many of its products. The Company’s businesses have been deemed “essential services,” “critical manufacturers,” and “life sustaining industries” under applicable state or national stay-at-home orders and, therefore, remain operational. Within the limitations imposed by the health and safety procedures described below, the Company has continued to manufacture the full range of products at its facilities, including certain products that are components for end-uses that are essential, critical or life sustaining such as: (i) polyester-based materials for flexible food packaging, (ii) polyethylene-based film for packaging products, (iii) aluminum extrusion parts for hospital beds, FEMA tents, temporary hospital structures and medical equipment, (iv) materials for face shields, and (v) polyethylene-based films used to protect components of flat panel displays during manufacturing and transportation processes, which are instrumental to allowing employees to work from home.
The Company’s protocols to protect the health and well-being of its employees from COVID-19 continue to develop as COVID-19 informed work practices evolve and the Company responds to recommended and mandated actions of government and health authorities.
The Company has educated employees about COVID-19 symptoms and hygiene best practices. It has adopted COVID-19 related pay and sick leave policies that require employees to stay home if they feel ill or have been exposed to others with the illness, until they are released to return to work by our Human Resources team. The Company’s policies include taking an employee’s temperature before entering production facilities; answering self-screening questions related to potential exposure and COVID-19 symptoms; mandating handwashing; requiring social distancing, and requiring face coverings on production floors at all times, requiring face coverings in common areas and office settings where social distancing is difficult; streamlining onsite personnel to only those required for production and distribution; strongly encouraging and, where mandated, requiring remote work for all those who can work from home; and disinfecting facilities. In the U.S., the Company has educated employees on COVID-19-related government benefits.
In April 2020, the Company began providing a weekly dashboard to its Board of Directors highlighting the impacts of COVID-19 on its employees, businesses and financial condition.
As of November 4, the Company was aware that 202 of its employees have had confirmed cases of COVID-19 since the outbreak began, with no fatalities. 179 of those employees have returned to work. Additional employees have been absent or self-quarantined due to COVID-19. Bonnell Aluminum is experiencing higher than normal absenteeism and hiring difficulties which it attributes to COVID-19-related factors. Bonnell Aluminum continuously attempts to match its direct labor with demand and is facing difficulty hiring sufficient labor to meet desired shipment levels.
Financial Considerations
The 2020 annual plan for Bonnell Aluminum (pre-COVID-19) included sales volume of 201 million pounds and EBITDA from ongoing operations of $65 million, versus 2019 sales volume of 208 million pounds and EBITDA from ongoing operations of $65.7 million. Bonnell's current projections for 2020 include sales volume of 184 million pounds and EBITDA from ongoing operations of $51 million. The current projections reflect an improvement versus the previous projections which were communicated on August 6, 2020 and included sales volume of 170 million pounds and EBITDA from ongoing operations of $42 million.
Approximately 59% of Bonnell Aluminum’s net sales in 2019 were related to building and construction (“B&C”) markets (non-residential B&C of 51% and residential B&C of 8%). Much of the current sales volume associated with the B&C market is related to contracts that existed at the start of the COVID-19 pandemic. Once completed, the level of new contracts is uncertain. During the economic downturn from 2007 to 2009 (also known as “The Great Recession”), the Company estimates that the aluminum extrusion industry demand peak-to-trough fell approximately, 40% from 2006 to 2009, with sequential annual declines during this period of approximately 13%, 13% and 20%, respectively. The Company estimates that the average peak-to-trough decline in demand in past business cycles since 1982 for the aluminum extrusions industry is approximately 20%. Overall, the Company believes that volume results for Bonnell Aluminum in the third quarter and year-to-date have outperformed the industry, and performance to date during the COVID-19 environment has exceeded the Company's expectations. No significant issues have arisen to date on the collection of accounts receivable at Bonnell Aluminum.
Demand has remained strong under COVID-19 conditions for the Company’s flexible food packaging films produced by Terphane. The Surface Protection component of PE Films had record performance for EBITDA from ongoing operations in the second quarter and first half of 2020, but experienced a slowdown in the third quarter which it expects to continue for the fourth quarter of 2020, based on industry projections for products using flat panel displays and current customer inventory corrections. In addition, the Company estimates that a portion of the third quarter decline in volume for the Surface Protection business is related to a customer product transition previously disclosed (see the PE Films section of this report for further discussion). No significant issues have arisen to date on the collection of accounts receivable at Terphane or Surface Protection.
Tredegar’s defined benefit pension plan, which was frozen at the end of 2007, was underfunded on a GAAP basis by $100 million at December 31, 2019, comprised of investments at fair value of $218 million and a projected benefit obligation (“PBO”) of $318 million. GAAP accounting requires adjustment for changes in values of assets and the PBO only at the end of each year, even though the value of these amounts changes daily. The Company estimates COVID-19-related changes to the values of pension plan assets and liabilities (mainly an increase in liabilities from the adverse impact of applying a lower discount rate to estimate the projected benefit obligation) resulted in an increase in the underfunding from $100 million to $120 million at September 30, 2020.
Tredegar owns approximately 18% of kaleo, Inc. (“kaléo”), which makes and sells an epinephrine delivery device under the name AUVI-Q®. The Company accounts for its investment in kaléo on a fair value basis. The Company’s estimate of the fair value of its interest in kaléo at September 30, 2020 was $34.5 million ($30.3 million after taxes), which represents a decrease of $36.2 million ($28.2 million after taxes) and a decrease of $61.0 million ($47.7 million after taxes) since June 30, 2020 and December 31, 2019, respectively. The decline in estimated fair value during the first nine months of 2020 was primarily due to: (i) lower expectations for 2020 EBITDA and net cash flow associated with lower market demand for epinephrine delivery devices, resulting from COVID-19-related delays in in-person back-to-school schedules which significantly impacted kaléo’s peak back-to-school season, and social distancing guidelines which disrupted 2020 summer and after-school activities, (ii) pricing pressure, and (iii) a higher private company liquidity discount. kaléo’s stock is not publicly traded. The ultimate value of Tredegar’s ownership interest in kaléo could be materially different from the $34.5 million estimated fair value reflected in the Company’s financial statements at September 30, 2020.
Tredegar had debt (all under its revolving credit agreement) of $7.0 million and cash of $35.0 million at September 30, 2020. Cash balances increased at the end of October as a result of the sale of the Personal Care business. The revolving credit agreement allows borrowings of up to $500 million and matures in June 2024. The Company believes that its most restrictive covenant (computed quarterly) is the leverage ratio, which permits maximum borrowings of up to 4x EBITDA, as defined under the revolving credit agreement for the trailing four quarters (“Credit EBITDA”). The Company had Credit EBITDA and a leverage ratio (calculated in the “Liquidity and Capital Resources” section of the Company’s Quarterly Report on the period ended September 30, 2020 ("Form 10-Q")) of $95.7 million and 0.07x, respectively, at September 30, 2020. The Company’s current stress testing under a COVID-19-driven recession indicates a low probability that a future leverage ratio will exceed 4.0x.
Third Quarter 2020 Results vs. Third Quarter 2019 Results
Net sales (sales less freight) in the third quarter of 2020 decreased versus 2019 primarily due to lower sales volume and the pass-through of lower metal costs, partially offset by an increase in average selling prices to cover higher operating costs. Sales volume in the third quarter of 2020 decreased by 5.0% versus 2019. Sales volume in the specialty market, which represented approximately 32% of 2019 sales, experienced double-digit declines for the period. Sales volume in the automotive market, which represented approximately 9% of 2019 sales, was flat versus the third quarter of 2019. Non-residential B&C shipments increased 2.5% in the third quarter of 2020 versus the third quarter of 2019, but the Company expects a decline in its shipments for this end market, potentially beginning at the end of 2020, as a result of COVID-19-related reduced demand. However, overall the Company believes that volume results for Bonnell Aluminum in the third quarter of 2020 and year-to-date have outperformed the industry, and performance to date during the COVID-19 environment has exceeded the Company's expectations. See the “The Impact of COVID-19” section for more information on business conditions and projections.
EBITDA from ongoing operations in the third quarter of 2020 was relatively flat in comparison to the third quarter of 2019. Lower volumes ($2.4 million) and higher labor and employee-related costs ($0.4 million), were partially offset by higher pricing ($1.0 million) and lower freight costs ($0.5 million). In addition, the timing of the flow through under the first-in first-out ("FIFO") method of aluminum raw material costs previously acquired at lower prices in a quickly rising commodity pricing environment resulted in a benefit of $1.5 million in the third quarter of 2020 versus a charge of $0.3 million in the third quarter of 2019.
First Nine Months 2020 Results vs. First Nine Months 2019 Results
Net sales in the first nine months of 2020 decreased versus 2019 primarily due to lower sales volume and the pass-through of lower metal costs, partially offset by an increase in average selling prices to cover higher operating costs. Sales volume in the first nine months of 2020 decreased by 11.8% versus 2019, which the Company believes was mainly a result of COVID-19-related lower demand.
EBITDA from ongoing operations in the first nine months of 2020 decreased in comparison to the first nine months of 2019 due to lower volumes ($13.2 million) and higher labor and employee-related costs ($2.0 million), partially offset by higher pricing ($5.7 million) and lower freight ($1.0 million). In addition, inventories accounted for under the FIFO method resulted in a charge of $1.8 million in the first nine months of 2020 versus a charge of $0.9 million in the first nine months of 2019.
Projected Capital Expenditures and Depreciation & Amortization
Capital expenditures for Bonnell Aluminum are projected to be $11 million in 2020, including infrastructure upgrades at the Carthage, Tennessee and Newnan, Georgia facilities ($2 million), and approximately $9 million required to support continuity of current operations. Depreciation expense is projected to be $14 million in 2020. Amortization expense is projected to be $3 million in 2020.
Third Quarter 2020 Results vs. Third Quarter 2019 Results
Net sales declined by $8.1 million in the third quarter of 2020 versus 2019 primarily due to previously disclosed customer product transitions in Surface Protection, inclusive of some cyclical customer inventory corrections ($6.8 million), and COVID-19-related factors in other product segments within PE Films ($1.3 million). The Company believes that the inventory corrections are related to a build-up by customers during the strong first half of 2020.
EBITDA from ongoing operations in the third quarter of 2020 decreased by $4.3 million versus the third quarter of 2019 primarily due to the customer product transitions in Surface Protection, inclusive of some inventory corrections ($4.4 million) and higher manufacturing operating costs and selling, general and administrative expenses ($0.5 million), partially offset by higher contribution from sales not impacted by the customer product transitions ($0.5 million).
Customer Product Transitions in Surface Protection
The Surface Protection component of PE Films supports manufacturers of optical and other specialty substrates used in flat panel display products. These films are primarily used by customers to protect components of displays in the manufacturing and transportation processes and then discarded.
The Company previously reported the risk that a portion of its film products used in surface protection applications will be made obsolete by possible future customer product transitions to less costly alternative processes or materials. These transitions principally relate to one customer. The Company believes that previously reported delays in this customer's transitions were recently resolved by the customer and much of the remaining transitions could occur by the end of 2021. Under this scenario, the Company estimates that the contribution to EBITDA from ongoing operations for PE Films could decline due to the remaining customer product transitions by $18 million in 2021 versus 2020 and $4 million in 2022 versus 2021. To offset the potential adverse impact, the Company is aggressively pursuing and making progress in generating contribution from sales from new surface protection products, applications and customers. Annual contribution to EBITDA from ongoing operations for PE Films on surface protection products unrelated to the customer product transitions has increased since 2018 by approximately $11 million.
First Nine Months 2020 Results vs. First Nine Months 2019 Results
Net sales increased by $4.1 million in the first nine months of 2020 versus 2019 due to higher sales of products unrelated to customer product transitions ($5.8 million), partially offset by lower sales associated with the customer product transitions that occurred during the third quarter of this year ($1.7 million).
EBITDA from ongoing operations in the first nine months of 2020 increased by $3.3 million versus the first nine months of 2019 primarily due to:
- A $1.9 million increase from Surface Protection, primarily due to sales of products unrelated to the customer product transitions ($3.7 million), partially offset by lower sales associated with the customer product transitions that occurred during the third quarter of this year ($1.3 million) and higher net manufacturing operating costs and selling, general and administrative expenses ($0.5 million); and
- A $1.2 million increase from Pottsville Packaging primarily related to higher sales volume and a $0.4 million favorable variance from other activities.
Projected Capital Expenditures and Depreciation & Amortization
Capital expenditures for PE Films are projected to be $8 million in 2020 including: $2 million to complete a scale-up line in Surface Protection to improve development and speed to market for new products, and $6 million for capital expenditures required to support continuity of current operations. Depreciation expense is projected to be $6 million in 2020. There is no amortization expense for PE Films.
Flexible Packaging Films
Flexible Packaging Films, which is also referred to as Terphane, produces polyester-based films for use in packaging applications that have specialized properties, such as heat resistance, strength, barrier protection and the ability to accept high-quality print graphics.
Third Quarter 2020 Results vs. Third Quarter 2019 Results
Net sales in the third quarter of 2020 increased 2.8% compared to the third quarter of 2019 primarily due to higher sales volume and favorable product mix, partially offset by lower selling prices from the pass-through of lower resin costs.
Terphane’s EBITDA from ongoing operations in the third quarter of 2020 increased by $5.1 million versus the third quarter of 2019 primarily due to:
- Lower raw material costs, net of lower selling prices ($0.9 million), higher sales volume ($0.9 million), favorable product mix ($1.0 million), and lower fixed ($1.2 million) and variable costs ($0.4 million);
- Net favorable foreign currency translation of Real-denominated operating costs ($0.6 million); and
- Foreign currency transaction gains of $0.5 million in 2020 versus gains of $0.3 million in 2019.
Terphane has experienced strong demand in all of its markets, including Brazil, North America and export markets, and especially in the U.S. for value-added products, driven by the need for safe packaged food and cleaning products during the COVID-19 environment. See the “The Impact of COVID-19” section for more information.
First Nine Months 2020 Results vs. First Nine Months 2019 Results
Net sales in the first nine months of 2020 decreased 1.4% compared to the first nine months of 2019 primarily due to lower selling prices from the pass-through of lower resin costs, partially offset by higher sales volume.
Terphane’s EBITDA from ongoing operations in the first nine months of 2020 increased by $12.1 million versus the first nine months of 2019 primarily due to:
- Lower raw material costs, net of lower selling prices ($5.6 million), higher sales volume ($2.2 million), favorable product mix ($1.8 million), lower fixed costs ($1.3 million), partially offset by higher variable costs ($1.1 million);
- Net favorable foreign currency translation of Real-denominated costs ($1.2 million);
- Foreign currency transaction gains of $0.2 million in the first nine months of 2020 versus transaction gains of $0.3 million in 2019; and
- A benefit of $1.2 million in the first three months of 2020 resulting from the favorable settlement of a dispute related to value-added taxes.
Projected Capital Expenditures and Depreciation & Amortization
Capital expenditures for Flexible Packaging Films are projected to be $5 million in 2020, including $1 million for new capacity for value-added products and productivity projects, and $4 million for capital expenditures required to support continuity of current operations. Depreciation expense is projected to be $1 million in 2020. Amortization expense is projected to be $0.4 million in 2020.
Tredegar Corporation is an industrial manufacturer with three primary businesses: custom aluminum extrusions for the North American building & construction, automotive and specialty end-use markets; surface protection films for high-technology applications in the global electronics industry; and specialized polyester films primarily for the Latin American flexible packaging market. Tredegar had 2019 sales from continuing operations of $826 million. With approximately 2,500 employees, the Company operates manufacturing facilities in North America, South America, and Asia.

